Contact type signal band
The contact band is made of two conductive silicone elements. They are separated by a certain distance. The tail of the contact band can be connected to different end piece, depending on its use and application. After putting it into the rubber sleeve and connecting it with the switch, all the components form a completer system.
1. Because of different lengths that can be selected, the safety edges can be easily and quickly assembled by users.
2. If properly installed, the safety margin won’t have the problem of water leakage. As long as the contact band works well, even if the safety margin is damaged, the function is still normal.
3. It is mainly used to protect the edges of automatic doors, automatic gates, rolling doors, car doors or industrial machinery and so on. The user must select suitable rubber sleeves according to the strength and speed of the moving part.
Max. driving force
Max. switching voltage
Max. switching current
Max. contact resistance
General ≤50 Ohm, Max. 150 Ohm
Max. conversion resistance
150 Ohm (No switching)
Min. bending radius (Vertical axis)
Min. bending radius (Horizontal axis)