Electromagnetic Wave Sensor/Rader

Electromagnetic Wave Sensor/Rader

The microwave sensor 2052.104 is suitable for various automatic doors, with high sensitivity and fast and accurate response. It uses the German detection chip 24.125GHZ to provide effective protection for the stability of the product. It can effectively adapt to certain special conditions, free from the influence of temperature, airflow, dust and smoke, and is fully applied to high-demand areas such as commercial, industrial and automatic control.
Chat Now

Product Details

 Art.No 2052.104

2052.104

Features:
1. Germany  24.125GHz detecting module, immune to temperature, humidity.
2. X-Y axis antenna detecting angle and area adjustabl
e, make sure the precise detection.
3. Intelligent circuit board enhance the sensitivity and stability.

4. Bi-directional and single-directional modes both available. The single-directional mode only accept the signal from coming way, and shield the signal from leaving way.


Technical data:

Model

2052.104

Transmitting frequency

24.125Ghz

Transmitting power

<20dbm EIRP

Transmitting frequency density

< 5mW/ cm ²

Install angle

15°, 30°, 45°, 60°

Install height (max)

3.5m

Detecting area

(install height 2.2 meters)

4x2m (W x D)

Detection mode

Motion

The minimum detecting speed

5cm/s

Power voltage

12V-24V AC(+/-10%), 12V-30V DC

Power dissipation

<2W (VA)

The relay contact

NO / COM

Maximal contact voltage

42V AC-60V DC

Maximal contact current

1A(Electric resistance)

The maximum switching power

30W(DC) / 60VA(AC)

Output holding time

0.5 second

Ambient temperature

-20~55

Protection rate

IP 54

Cable length

2.5m


外贸快车宣传图 11外贸快车宣传图 22

 


Inquiry