Infrared motion sensor
1.Very high accurracy of the detection zone.
2.Homogeneous lobe independent of the external temperature conditions,detection guaranteed even when the background temperature is close to that of the human body.
3.Insensitive to air currents and any sudden temperature variation.
4. Detection zone can be adjusted accurately by means of a masking lens
5. Insensitive to external interference such as rain, snow, etc..
6. Very fast response time.
7.Low thermal remanence of the Pyro element sensor after detection(no memory effect)
1.Electronics controlled by a microprocessor that,through a digital treatment, provides an optimal sensitivity an efficient thermal compensation as well as a high immunity against interference.
2 Precision optics perfectly delimiting the detection zone and increasing the sensitivity of the sensor.
3.P.I.R. sensor with four independent zones which gives an identical sensitivity in all directions.
4. Enhanced immunity against vibrations. Thanks to the use of a pyroelectric sensor from the last generation, the FLY is also immune to GSM interference.
5. Injected lens which offers better mechanical resistance to vandalism.
6.Adjustments for universal use :Adjustment of the size of the detection zone is carried out by cutting out segments of the masking lens. Electronic adjustments are performed by means of DIP switches.
1.The miniaturized size of the FLY offers a minimal visual impact and allows easy mounting,in cramped places.Its robustness gives it vandal-proof protection.
2.The FLY becomes even more unobtrusive when mounting in the ceiling in its FLYUP version using its FCA accessory.
3.Integrated in its FSA accessory for which the keywords are aestheticism and impermeability, and surface mounted, the FLYCATCHER created in this way will appeal to the most demanding architects.
passive infrared with microprocessor
max 2.5 m x 1.5 for a mounting
height of 2.2 m
Maximum mounting height
12-24 V AC (50/60 Hz) 10/+10 %
12-24 V DC-10/+30 %
< 10 mA (20 mA if the output relay is activated)
potential free contact NO/NC
1 A/75V DC OR 50V AC
Warm up time
Relay hold time
0.5s or 2s
max 200 ms
0.1 to 1.5 m/s
sensitivity: ON = high- OFF= low
output hold time :ON= 2.0sec -OFF= 0.5sec
passive infrared with four elements 15 Fresnel
lenses with full independent masking possibility
small 5 plug-in contacts connector
0.2 to 0.5 mm
1 red LED
-30℃ to +55℃
anthracite grey or white
immune to electrical and radio frequency interference according to EC 89336/CEE and 92/31/CEE
91 mm (L)x 40 mm (H)
121 mm (L)x51 mm (H)
gris anthracite,blanc ou alu
IP 54 (UV resistant)