Straight Arm Swing Door Machine Installation Program

- Dec 17, 2018 -

1. The straight arm type swing door machine is installed inside the door after closing the door. At least 300mm from the ground.

2. The swing door electrical control box is installed inside the door after closing the door. At least 500mm from the ground.

3, 2 infrared radiation is installed after closing the door, the outside of the door is at least 400mm from the ground.

4. External power supply line: RVV 3*1.5

5, swing door drive line: RVV 4*1.5

6, infrared radiation connection cable: RVV 4*0.5

赛道画册0309-1-23