It is widely used in induction control of the entrance and exit automatic doors in the operating room, laboratory and clean rooms of hospitals. It is easy to operate, uses feet to sense, releases your hands, and effectively avoid the pollution of hand contact.
► It is integrated with the controller and pedal box ,so the installation and wiring are simpler.
► It is controled by microcomputer, international refined brushed stainless steel surface design.
► Its screws are fixed on the front snugly,and inlaying the correlation electric eye.It is easy to install,meanwhile it has stable performance and strong anti-interference ability.
► Microprocessor modulating and demodulating active by infrared.
► Detection mode: When the foot appears,the beam will be cut off, then triggering signal produced.
Microprocessor modem active active infrared
The foot appears and the beam is cut off, triggering a signal to open the door.
When the shooting control is effective the red light is on and the green light flashes when the beam is cut off.
Meet 89,/336CEE standard
relay normally open or normally closed optional
Recommended installation height
Center is 0.3 meters from the ground
8.2mA (DC 12V)
47mA (DC 12V)