Radar Detector / Vehicle detection sensor
*Various anti-smashing modes: large cars, small cars, motorcycles, electric cars, pedestrians.
*Specific area detection mode: detectable distance 0.1m-20m.
*Special scene customization: distance detection, speed detection, movement detection.
*Support all types of barriers: straight barriers, curved barriers, fence barriers, advertising barriers, airborne barriers.
Transmit frequency (GHz)
Radar antenna (TR)
Working voltage (v)
Less than 1.6W
Horizontal width (m)
Default +- 0.5m (+-1m dial code adjustable)
Vertical width (m)
Default 2.5m (adjustable by dialing 0.5m-6, support customization)
Detection accuracy (m)
20Hz in anti-smashing mode, 50Hz in trigger mode
Relay signal, support customization
Signal indicator light
Working indicator light, direction identification indicator light
Straight arms, fence arms, advertising arms and other barriers
1-5 seconds adjustable
TRADITIONAL LOOP DETECTORS:
*High cost during installation to cut and recover the pavement
*High cost of maintenance because loops need to be replaced about every two years
*Many scenes are not suitable to install loops, where heavy-current cables, optical cables, water and gas pipelines are beneath the pavement
TRADITIONAL INFRARED DETECTORS:
*Difficult to install.
*High maintenance cost.
*Damage to the pavement.
*High false alarm rate.
*It is susceptible to interference, such as dash and falling leaves.
*Infrared detector must be installed in pairs at both sides of the entrance.
*Trigger radar can detect vehicles accurately.
*Side-mounted, highly adaptable and reliable with scene self-learning.
*Based on microwave high-precision positioning technology with lower false alarm rate.
*Anti-fall radar can detect vehicles, non-motorized vehicle and pedestrians, and protect them from being hit by the barrier gate.